Validation of the BCR sequential extraction procedure for natural radionuclides

Determining the availability of natural radionuclides in environmental conditions is increasingly important in order to evaluate their toxicity. A validated procedure is necessary to ensure the comparability and accuracy of the results obtained by different laboratories. For that, an optimised BCR sequential extraction procedure has been applied to the certified reference material (CRM), coded as BCR-701, and their resulting liquid and solid fractions were subjected to an exhaustive chemical and radioactivity characterisation. In this sense, several material characterisation techniques were used for chemical, mineralogical, and radioactive characterisation, in order to gain basic information about the obtained fractions. In accordance with the results of this work, the BCR sequential extraction procedure has been validated for the most significant alpha-emitter natural radionuclides (²¹⁰Po, ²³⁴U, ²³⁸U, ²³⁰Th, ²³²Th, and ²²⁶Ra). It has been demonstrated that their mobility is related to the speciation under environmental conditions and the type of radionuclide; we have even found differences between radionuclides of the same element, such as the cases of the pairs ²³⁴U²³⁸U and ²³⁰Th²³²Th, for the BCR-701. In addition, we found that radium was mainly bound to the reducible fraction (Fe and Mn-oxyhydroxides), uranium to the oxidizable fraction (organic matter and sulphides), and that the polonium and thorium isotopes had a high affinity with the particulate phase (non-mobile fraction).