Related Experiment Video
Updated: Feb 14, 2026

Salinity-dependent Toxicity Assay of Silver Nanocolloids Using Medaka Eggs
Published on: March 18, 2016
Net acidity indicates the whole effluent toxicity of pH and dissolved metals in metalliferous saline waters
Bradley P Degens1, Rick Krassoi2, Lynette Galvin1
1Department of Water and Environmental Regulation, Locked Bag 33, Cloisters Square, Perth, WA, 6850, Australia.
Abstract:
Measurements of potential acidity in water are used to manage aquatic toxicity risks of discharge from acid sulfate soils or acid mine drainage. Net acidity calculated from pH, dissolved metals and alkalinity is a common measurement of potential acidity but the relevance of current risk thresholds to aquatic organisms are unclear. Aquatic toxicity testing was carried out using four halophytic organisms with water from four saline sources in southern Western Australia (3 acidic drains and one alkaline river; 39-40 g TDS/L) where acidity was varied by adjusting pH to 4.5-6.5. The test species were brine shrimps (Artemia salina), locally sourced ostracods (Platycypris baueri), microalgae (Dunaliella salina) and amphipods (Allorchestes compressa). Testing found the EC10 and IC10 of net acidity ranged from -7.8 to 10.5 mg CaCO3/L with no survival or growth of any species at >47 mg CaCO3/L. Reduced net acidity indicated reduced whole effluent toxicity more reliably than increased pH alone with organisms tolerating pH up to 1.1 units lower in the absence of dissolved metals. Variation in toxicity indicated by net acidity was mostly attributed to reduced concentrations of dissolved Al and Fe combined with higher pH and alkalinity and some changes in speciation of Al and Fe with pH. These results indicate that rapid in-field assessments of net acidity in acidic, Al dominated waters may be an indicator of potential acute and sub-chronic impacts on aquatic organisms.
Related Concept Videos
Water: A Bronsted-Lowry Acid and Base
Bonding in Metals
Water and Mineral Acquisition
Metal-Ligand Bonds
In these complexes, transition metals form coordinate covalent bonds, a kind of Lewis acid-base interaction in which both of the electrons in the bond are contributed by a donor (Lewis base) to an electron acceptor (Lewis acid). The Lewis acid in...
Ions as Acids and Bases
Salts are ionic compounds composed of cations and anions, either of which may be capable of undergoing an acid or base ionization reaction with water. Aqueous salt solutions, therefore, may be acidic, basic, or neutral, depending on the relative acid-base strengths of the salt’s constituent ions. For example, dissolving the ammonium chloride in water results in its dissociation, as described by the equation:
Alkali Metals
Table 1: Properties of the alkali metals

