Related Experiment Video
Updated: Feb 14, 2026

Single-Molecule Imaging of Nuclear Transport
Published on: June 9, 2010
Development of an ultrafast single photon counting imager for single molecule imaging
Tohru Ohnuki1, Xavier Michalet2, Arun Tripathi1
1Department of Physics and Astronomy, 405 Hilgard Ave.
Abstract:
We have begun developing an innovative ultra-fast single-photon counting imager which comprises a mega-pixel CMOS array and a newly-designed Image Intensifier. It is expected to have single photon sensitivity with 100 psec time resolution, operational at a total counting rate exceeding 1MHz. The readout is based on dead-time-free flash ADC, running at 1-2GS/s, followed by a FPGA for real-time parallel data processing. Such a device has not been realized before and is expected to revolutionize time-resolved fluorescence imaging and spectroscopy from a single-molecule to whole animal level. To evaluate the design principle, an Image Intensifier with a GaAsP photocathode (>40% quantum efficiency at 400-600 nm) followed by double MCP was evaluated together with an existing CMOS camera. In our future design, the image from CMOS Camera will be combined with the MCP output, followed by a set of FPGA and CPU for real time data processing. This stream line method will allow ultra fast single-photon counting with 100 psec time resolution and 20 µm position resolution (1M pixel imaging). In this paper, we present the design principle and preliminary results on its performance. Our future plan and the design goals are also described.
Related Concept Videos
Load along a Single Axis
Consider a beam of length L subjected to a varying load, which is a combination of parabolic and trapezoidal load distribution along the x-axis. In this case, it is essential to determine the resultant loads, their locations, and...
Single Pipe Systems
In a Type I problem, fluid properties (density and viscosity), pipe characteristics (including diameter, length, and surface roughness), and the flow rate or average velocity are...
Angular Momentum: Single Particle
Single-pass Transmembrane Proteins
Inductance: Single-Phase And Three-Phase Line
Single-Phase Two-Wire Line:
A single-phase line consists of two solid cylindrical conductors, denoted as x and y. Each conductor carries phasor currents ix and iy, respectively. Given that the sum of these currents is...
Capacitance: Single-Phase And Three-Phase Line
Single-Phase Lines
Consider a single-phase, two-wire transmission line with equal phase spacing energized by a voltage source. One conductor carries a uniform positive charge, while the other carries an equal negative charge. The capacitance C of the line can be derived from the voltage V between the conductors. For a one-meter section of the line, the capacitance is given...

