Related Experiment Video
Updated: Feb 13, 2026

Dependence of Laser-induced Breakdown Spectroscopy Results on Pulse Energies and Timing Parameters Using Soil Simulants
Published on: September 23, 2013
Generation of high-energy, kilohertz-rate narrowband tunable ultraviolet pulses using a burst-mode dye laser system
Abstract:
Typical commercial pulsed dye laser systems used in the generation of narrowband, tunable ultraviolet radiation for planar laser-induced fluorescence (PLIF) imaging are optimized for either high (∼5-10 kHz) repetition rates at comparatively low ultraviolet pulse energies (hundreds of microjoules) or high-output pulse energies (>10 mJ) at comparatively low repetition rates (∼10 Hz). In this work we use a frequency-doubled Nd:YAG burst-mode laser to pump a custom dye laser system for high pulse energies and repetition rates of 7.5, 10, and 20 kHz at 566 nm. The frequency-doubled output of over 2.2 mJ/pulse at 283 nm, which can be used for PLIF imaging of combustion radicals, is an order of magnitude higher per pulse energy as compared with continuously pulsed dye laser systems and is ∼3× higher in overall efficiency than a burst-mode optical parametric oscillator at similar wavelengths. The influence of repetition rate, pump energy, and dye concentration on the output conversion efficiency and pulse-to-pulse stability of the current system is discussed.
More Related Videos
Related Concept Videos
Increased pulse rate
Many factors can elevate the risk of developing tachycardia. These include advanced age, a family history of arrhythmias, and an...
Decreased pulse rate
There are specific risk factors that can elevate the likelihood of developing bradycardia. Advanced age is a significant factor, with...
What is a Mode?
There can be more than one mode in a data set if multiple values have the same highest frequency. For instance, suppose that the Statistics exam scores of 20 students are: 50; 53; 59; 59; 63; 63; 72; 72; 72; 72; 72; 76; 78; 81; 83; 84; 84; 84; 90; 93. Here, the mode is 72, as it occurs most frequently, five times.
A data set with two modes is called bimodal. For example,...
Pulse
The pulse serves as a clinical...
Pulse
Pulse Rate and its Significance
Pulse rate, often measured in beats per minute (bpm), reflects the heart rate (HR), which is influenced by numerous factors such as stress, physical activity, and hormonal changes. A normal resting adult pulse rate falls...
Rate-Determining Steps
In a multistep reaction mechanism, one of the elementary steps progresses significantly slower than the others. This slowest step is called the rate-limiting step (or rate-determining step). A reaction cannot proceed faster than its slowest step, and hence, the rate-determining step limits the overall reaction rate.
The concept of rate-determining step can be understood from the analogy of a 4-lane freeway with a short-stretch of traffic-bottleneck caused due to...

