Related Experiment Video
Updated: Feb 13, 2026

Probing and Mapping Electrode Surfaces in Solid Oxide Fuel Cells
Published on: September 20, 2012
Simultaneous use of a crossflow filtration membrane as microbial fuel cell anode - Permeate flow leads to 4-fold
Joana Madjarov1, Arne Götze1, Roland Zengerle1
1Laboratory for MEMS Applications, IMTEK - Department of Microsystems Engineering, University of Freiburg, Georges-Koehler-Allee 103, 79110 Freiburg, Germany.
Abstract:
A new concept for the combination of membrane bioreactors and microbial fuel cells is introduced, that aims at the production of electricity for reducing the overall energy consumption of wastewater treatment. In contrast to previous approaches, the anode is integrated as microfiltration membrane in sidestream crossflow configuration. Using a stainless steel filtration membrane with G. sulfurreducens and an acetate-based synthetic medium, up to 4-fold higher current densities are achieved. In a standard setup without filtration, a membrane of filter grade 1 µm shows current densities of 5.8 A m-2 ± 0.5 A m-2 compared to >11 A m-2 when it is used simultaneously as membrane filter. With smaller pore sizes of filter grade 0.5 µm, 4.4 A m-2 ± 0.5 A m-2 in a standard setup and >15 A m-2 in a filtration setup are achieved. The permeate flow was identified as the main parameter leading to increased current densities.
More Related Videos
11:18A Guide to Concentration Alternating Frequency Response Analysis of Fuel Cells
Published on: December 11, 2019
10:27Simultaneous Multi-surface Anodizations and Stair-like Reverse Biases Detachment of Anodic Aluminum Oxides in Sulfuric and Oxalic Acid Electrolyte
Published on: October 5, 2017
Related Concept Videos
Batteries and Fuel Cells
Current Density
Boundary Conditions for Current Density
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Molecular Chaperones and Protein Folding
The...
Filtration and Urine Formation