A stretchable conductive Polypyrrole Polydimethylsiloxane device fabricated by simple soft lithography and oxygen...

This paper reports a simple method used to fabricate a stretchable conductive polypyrrole (PPy) rough pore-shape polydimethylsiloxane (p-PDMS) device. An abrasive paper is first used to imprint rough micro-structures on the SU-8 micromold. The p-PDMS microchannel is then fabricated using a standard soft-lithography process. An oxygen plasma treatment is then applied to form an irreversible sealing between the microchannel and a blank cover PDMS. The conductive layer is formed by injecting the PPy mixture into the microchannel which polymerizes in the rough pore-shape micro-structures; The PPy/p-PDMS hybrid device shows good electrical property and stretchability. The electrical properties of different geometrical designs of the PPy/p-PDMS microchannel under stretching were investigated, including straight, curved, and serpentine. Mouse embryonic fibroblasts (NIH/3 T3) were also cultured inside the PPy/p-PDMS device to demonstrate good biocompatibility and feasibility using the conductive and stretchable microchannel in cell culture microfluidics applications. Finally, cyclic stretching and bending tests were performed to evaluate the reliability of PPy/p-PDMS microchannel.