Related Experiment Video
Updated: Feb 12, 2026

Author Spotlight: High-Resolution 4D Light-Sheet Imaging and Virtual Reality in Zebrafish for Single-Cell Analysis of Heart Function
Published on: January 5, 2024
Thermoplastic wrapped lead sheet to reduce cardiac device cumulative dose
Alexandra Bourgouin1, Nicolas Varfalvy2, Louis Archambault3
1Département de physique, de génie physique et d'optique, Université Laval, Québec, Québec, Canada.
Abstract:
The objective of this project is to evaluate the percentage dose reduction in cardiac implantable electronic devices (CIEDs) using a thermoplastic wrapped lead sheet. The dose to CIED is evaluated in various situations with and without a lead shield. The efficiency of this type of shielding is supported by measurements made with a commercial plastic scintillation detector (PSD). Percentage depth dose (PDD) curve and lateral dose measurements (LDMs) were made with and without shielding for photon and electron beams. Photon LDMs were made at a depth of 0.5 cm. PSD measurements were compared with dose calculation from the treatment planning system (TPS). The benefit of shielding is greater at 23 MV than at 6 MV, with an average reduction of 71% and 59% of dose, respectively, for out-of-field distance range between 3 and 15 cm. Measurement of posterior beams shows there is no significant increase in skin dose due to backscatter from the lead sheet even when the field intercepts it. Large deviations between TPS calculation and measurements have been observed. The use of lead shielding with an anterior field is advised and provides an easy way to decrease the cumulative dose to CIEDs. Interception of shielding by an electron beam would increase significantly the cumulative dose to CIED for high energies or decrease the quality of the treatment. For a posterior out-of-field, shielding does not have a significant impact on CIED dose.
Related Concept Videos
Cumulative Frequency Distribution
Flow Sheet
Here's a closer look at the examples of flowsheets commonly used by nurses:
Graphic Sheet Documentation:
Reducing Line Loss
With a step-up transformer at the source, the voltage is increased, thereby reducing the current in the transmission lines since power loss in...
Dose Size and Dosing Frequency: Determination Methods
Determination of Multiple Dosing Parameters: Loading and Maintenance Doses
Phase-lead and Phase-lag Controllers

