Related Experiment Video
Updated: Feb 11, 2026

Author Spotlight: Metallic Nanocomposites to Eliminate Antibiotic-Resistant Bacteria
Published on: October 4, 2024
Biodegradable κ-carrageenan/nanoclay nanocomposite films containing Rosmarinus officinalis L. extract for improved
Afsaneh Nouri1, Mohammad Tavakkoli Yaraki2, Mohammad Ghorbanpour1
1Department of Chemical Engineering, University of Mohaghegh Ardabili, Ardabil, Iran.
Abstract:
In this study, biodegradable κ-carrageenan films containing 3% nanoclay and different amounts of rosemary extract (1, 2 and 3% v/v) were fabricated and their physical, thermal, and mechanical properties, as well as antimicrobial activity were examined. The film thickness did not change significantly by the addition of rosemary extract. UV light transmission value in the control film was 20.46%, while the value for the film with 3% v/v rosmary extract reduced to 0.13%. Elongation at break (EB%) and tensile strength (TS) of the carrageenan film without the extract were 19.07% and 15.96MPa, respectively, while after adding 3% v/v of rosemary extract, the EB and TS were increased to 27.17% and 30.77MPa, respectively. Incorporation of rosemary extract greatly reduced water vapor permeability (WVP) (5.27×10-10g/m·s·Pa in control film vs 2.14×10-10g/m·s·Pa in the film containing 3% v/v rosemary extract). More importantly, the carrageenan film with 3% extract displayed >99% inhibition against B. cereus, E. coli, P. aeruginosa, and S. aureus compared with the control film. The present study showed that rosemary extract is an excellent additive to enhance the mechanical strength and antibacterial activity of carrageenan films and can be used for active packing in food packing industry.
More Related Videos
06:34Application of a Coupling Agent to Improve the Dielectric Properties of Polymer-Based Nanocomposites
Published on: September 19, 2020
13:38Isolation of Native Soil Microorganisms with Potential for Breaking Down Biodegradable Plastic Mulch Films Used in Agriculture
Published on: May 10, 2013
Related Concept Videos
Acid Strength and Molecular Structure
In the absence of any leveling effect, the acid strength of binary compounds of hydrogen with nonmetals (A) increases as the H-A bond strength decreases down a group in the periodic table. For group 17, the order of increasing acidity is HF < HCl < HBr < HI. Likewise, for group 16, the order of increasing acid strength is H2O < H2S < H2Se < H2Te. Across a row in the periodic table, the acid strength of binary hydrogen compounds increases with increasing...
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
Relation Between Tensile Strength and Compressive Strength of Concrete
The Equilibrium Binding Constant and Binding Strength
Strength and Heat of Hydration
The heat of hydration for each cement compound is significant; for instance, tricalcium aluminate (C3A) and...
Fatigue Strength of Concrete