Related Experiment Video
Updated: Feb 10, 2026

Use of Freeze-thawed Embryos for High-efficiency Production of Genetically Modified Mice
Published on: April 2, 2020
The application of an efficient modified decolorizer in coagulation treatment of high color reclaimed water
Mengqi Wang1, Yimei Tian1, Xin Zhao1
1School of Environmental Science and Engineering, Tianjin University, Haihe Education Park, Tianjin 300350, China
Abstract:
High color concentrations in inflows at reclaimed water treatment plants are typically considered as emergency situations, which must be solved using an appropriate decolorizing process. Using the decoloration mechanism of a modified dicyandiamide-formaldehyde polymer (DFP), a urea-formaldehyde polymer and a melamine-formaldehyde polymer (MFP) were prepared with ammonium chloride and ammonium sulfate as the modifiers. An orthogonal experiment indicated that a modified urea-formaldehyde polymer had no effect on decolorization; however, the MFP modified by ammonium chloride in number 16 (MMFP-C16), the DFP modified by ammonium chloride in number 9 (MDFP-C9) and modified by ammonium sulfate in number 6 (MDFP-S6) were successful. The removal rates were above 50% in acidic and reactive dye reclaimed water. Fourier transform infrared spectroscopy was used to microscopically analyze the differences in decolorization effect among the polymers. The effect of pH on decolorization was analyzed. Compared to the MDFP-C9 and MDFP-S6, the MMFP-C16 was not sensitive to changes in conditions. The pilot plant test proved that the three optimal decolorizers also had a good decolorizing effect, and MMFP-C16 was better both at decolorizing and floc sedimentation. Thus, the latter can be considered as an efficient modified decolorizer for rapid treatment of high color reclaimed water.
Related Concept Videos
Coagulation
Coagulation
During the coagulation phase, clotting factors, or procoagulants, play a vital role in initiating and progressing the coagulation cascade. This cascade is a series of reactions...
Colors and Magnetism
When atoms or molecules absorb light at the proper frequency, their electrons are excited to higher-energy orbitals. For many main group atoms and molecules, the absorbed photons are in the ultraviolet range of the electromagnetic spectrum, which cannot be detected by the human eye. For coordination compounds, the energy difference between the d orbitals often allows photons in the visible range to be absorbed and emitted, which is seen as colors by the human...
Color Vision
Water and Mineral Acquisition
States of Water
Water freezes when the intermolecular forces are greater than the kinetic energy. Unlike most other substances, water is less dense in its solid state than in its liquid state. This is because each water molecule can form...

