Related Experiment Video

Updated: Feb 10, 2026

Fabrication of High Contrast Gratings for the Spectrum Splitting Dispersive Element in a Concentrated Photovoltaic System
12:08

Fabrication of High Contrast Gratings for the Spectrum Splitting Dispersive Element in a Concentrated Photovoltaic System

Published on: July 18, 2015

11.2K

Performance of a prototype stationary catadioptric concentrating photovoltaic module

John Lloyd, Michael Pavilonis, Christopher Gladden

    Optics Express
    |May 27, 2018
    PubMed

    More Related Videos

    Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass ADG Fresnel Lens for Concentrating Photovoltaics09:00

    Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass ADG Fresnel Lens for Concentrating Photovoltaics

    Published on: October 27, 2017

    9.3K
    Inkjet Printing All Inorganic Halide Perovskite Inks for Photovoltaic Applications07:42

    Inkjet Printing All Inorganic Halide Perovskite Inks for Photovoltaic Applications

    Published on: January 22, 2019

    11.8K

    Related Concept Videos

    Concepts and Prototypes01:24

    Concepts and Prototypes

    The human nervous system handles vast amounts of information by translating sensory stimuli into neural impulses, which the brain processes, creating thoughts expressed through language or stored as memories. The brain also synthesizes information from emotions and memories, which significantly influence thoughts and behaviors. This intricate process creates a comprehensive mental picture.
    The brain organizes this information using concepts, which are mental categories grouping linguistic data,...
    552
    Gas Chromatography: Types of Columns and Stationary Phases01:17

    Gas Chromatography: Types of Columns and Stationary Phases

    Gas chromatography (GC) relies on stationary phases to separate and analyze components in a sample. There are two main types of stationary phases: liquid and solid. Liquid stationary phases are non-volatile, thermally stable, and chemically inert liquids coated onto the column. Solid stationary phases are particles of adsorbent material, such as silica gel or molecular sieves.
    For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...
    2.4K
    Concentration Cells02:41

    Concentration Cells

    A concentration cell is a type of a  voltaic cell constructed by connecting two almost identical half-cells, both based on the same half-reaction and using the same electrode, differing only in the concentration of one redox species. A concentration cell's potential, therefore, is determined only by the concentration difference of the particular redox species.
    Consider the following voltaic cell:
    25.9K
    Solution Concentration and Dilution02:59

    Solution Concentration and Dilution

    The relative amount of a given solution component is known as its concentration. Often, though not always, a solution contains one component with a concentration that is significantly greater than that of all other components. This component is called the solvent and may be viewed as the medium in which the other components are dispersed or dissolved. Solutions in which water is the solvent are, of course, very common on our planet. A solution in which water is the solvent is called an aqueous...
    134.8K
    Stress Concentrations01:13

    Stress Concentrations

    The concept of stress concentration is crucial for understanding how materials respond under bending stresses, particularly when there are irregularities or discontinuities in the material's geometry. Normally, stress in a symmetric member subjected to pure bending is assumed to be uniformly distributed across the entire cross-section. However, this assumption does not hold when there are variations in the cross-sectional geometry or the presence of notches and holes.
    The stress...
    654
    Stress Concentrations01:24

    Stress Concentrations

    Stress concentration is when stress intensifies near discontinuities such as holes or abrupt cross-sectional changes in a structural member. This localized stress can often surpass the average stress within the member. The stress distribution in flat bars, either with a circular hole or varying widths connected by fillets, can be determined experimentally using a photoelastic method. The results are based on ratios of geometric parameters like the ratio of the hole's radius to the smaller...
    717