Related Experiment Video
Updated: Feb 10, 2026

Writing Bragg Gratings in Multicore Fibers
Published on: April 20, 2016
Novel fabrication technique for phase-shifted fiber Bragg gratings using a variable-velocity scanning beam and a
Abstract:
A new method is proposed and demonstrated for fabricating phase-shifted fiber Bragg gratings (FBGs) using a variable-velocity scanning UV laser beam in combination with a shielded phase mask. The transmission properties of phase-shifted FBGs were analyzed based on coupled-mode theory and a transfer matrix method. The grating is divided into three parts to allow for easier analysis of FBG properties. These segments included a uniform FBG1 and FBG2 which were separated by a shielded section. A novel phase-shifted FBG was fabricated using this method, in which the refractive indices of FBG1 and FBG2 were different. Transmission properties of these phase-shifted FBGs were simulated numerically using MATLAB, and the experimental results and simulated results are in good agreement. In addition to the length and effective refractive index of the shielded section, the phase shift value of a phase-shifted FBG was also found to be dependent on the lengths and effective refractive indices of FBG1 and FBG2. Moreover, we predicted that changing the scanning velocity for fabricating FBG2 would adjust phase shift value, which exhibits a positive linear relationship with the scanning velocity. These results can provide guidelines for fabricating any phase shift value FBGs. This technique is simple, convenient, and may be developed further for use in fabricating novel tunable fiber filters or DFB fiber lasers.
Related Concept Videos
Phase Diagrams
Phase Transitions
Inductance: Single-Phase And Three-Phase Line
Single-Phase Two-Wire Line:
A single-phase line consists of two solid cylindrical conductors, denoted as x and y. Each conductor carries phasor currents ix and iy, respectively. Given that the sum of these currents is...
Capacitance: Single-Phase And Three-Phase Line
Single-Phase Lines
Consider a single-phase, two-wire transmission line with equal phase spacing energized by a voltage source. One conductor carries a uniform positive charge, while the other carries an equal negative charge. The capacitance C of the line can be derived from the voltage V between the conductors. For a one-meter section of the line, the capacitance is given...
Phase Changes
A substance melts or freezes at a temperature called its melting point and boils or condenses at its boiling point. These temperatures depend on pressure. High pressure favors the denser form of the substance, so typically, high pressure...
Phase-lead and Phase-lag Controllers

