Interplay of the photon drag and the surface photogalvanic effects in the metal-semiconductor nanocomposite

G M Mikheev1, A S Saushin1, V M Styapshin1

  • 1Institute of Mechanics, Udmurt Federal Research Center of the UB RAS, Izhevsk, 426067, Russia.

Scientific Reports
|June 7, 2018
PubMed

Related Concept Videos

Metal-Semiconductor Junctions01:24

Metal-Semiconductor Junctions

The contact of metal and semiconductor can lead to the formation of a junction with either Schottky or Ohmic behavior.
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
1.1K
Biasing of Metal-Semiconductor Junctions01:27

Biasing of Metal-Semiconductor Junctions

Biasing metal-semiconductor junctions involves applying a voltage across the junction. Specifically, the metal is connected to a voltage source, while the semiconductor is grounded. This technique is essential for controlling the direction and magnitude of current flow in electronic devices, including diodes, transistors, and photovoltaic cells.
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
625
Drag01:23

Drag

Drag is a resistive force opposing an object’s motion through a fluid, resulting from surface pressure and shear forces. It comprises two components: a perpendicular one from pressure and a tangential one from shear stress. Accurate drag calculations use pressure and wall shear stress distributions, often determined through Computational Fluid Dynamics (CFD) or wind tunnel testing. The drag coefficient, a dimensionless measure, depends on factors like shape, Reynolds number, Mach number,...
425
Semiconductors01:22

Semiconductors

There is variation in the electrical conductivity of materials - metals, semiconductors, and insulators that are showcased with the help of the energy band diagrams.
Metals such as copper (Cu), zinc (Zn), or lead (Pb) have low resistivity and feature conduction bands that are either not fully occupied or overlap with the valence band, making a bandgap non-existent. This allows electrons in the highest energy levels of the valence band to easily transition to the conduction band upon gaining...
1.6K
Drag Force and Terminal Speed01:18

Drag Force and Terminal Speed

An interesting force in everyday life is the force of drag on an object when it is moving in a fluid. Like friction, the drag force always opposes the motion of an object. Unlike simple friction, the drag force is proportional to some function of the velocity of the object in that fluid. This functionality is complicated and depends upon the shape of the object, its size, its velocity, and the fluid it is in. For most large objects, such as cyclists, cars, and baseballs, that are not moving too...
3.5K
Types of Semiconductors01:20

Types of Semiconductors

Intrinsic semiconductors are highly pure materials with no impurities. At absolute zero, these semiconductors behave as perfect insulators because all the valence electrons are bound, and the conduction band is empty, disallowing electrical conduction. The Fermi level is a concept used to describe the probability of occupancy of energy levels by electrons at thermal equilibrium. In intrinsic semiconductors, the Fermi level is positioned at the midpoint of the energy gap at absolute zero. When...
1.5K