Application of Phragmites australis to remove phenol from aqueous solutions by chemical activation in batch and...

The ability of the agricultural residue of Phragmites australis to serve as an absorbent material used to remove phenol from aqueous solutions in batch and continuous fixed-bed columns was investigated. Prepared adsorbents were characterized by SEM, FTIR, and pHpzc methods. The equilibrium adsorption (qe) of phenol was increased from 9.61 to 29.40 mg/g when the initial phenol concentrations increased from 50 to 150 mg/L. The max adsorption capacity of Phragmites australis was found to be 29.60 mg/g at 30 °C. In column studies, a higher flow rate, higher initial concentration of phenol, and shorter packing layer height increase the column adsorption capacity of phenol. In a batch and continuous fixed-bed column studies, the experiment data was evaluated by some classic models. Fitting degree between the experimental results shows that the pseudo-second-order adsorption kinetics and Langmuir model were the best. Thomas and Yoon-Nelson models were in good agreement with the experimental breakthrough curve data. Both batch and continuous investigation indicated that Phragmites australis could be used as a fine adsorbent to remove phenol and that the adsorption efficiency improved significantly in the column experiment.