Related Experiment Video
Updated: Feb 9, 2026

In Situ Soil Moisture Sensors in Undisturbed Soils
Published on: November 18, 2022
Design and Test of a Soil Profile Moisture Sensor Based on Sensitive Soil Layers
Zhenran Gao1, Yan Zhu2, Cheng Liu3
1National Engineering and Technology Center for Information Agriculture, Jiangsu Key Laboratory for Information Agriculture, Key Laboratory for Crop System Analysis and Decision Making, Ministry of Agriculture, Jiangsu Key Laboratory for Information Agriculture, Jiangsu Collaborative Innovation Center for the Technology and Application of Internet of Things, Nanjing Agricultural University, Nanjing 210095, China. gzrsunrise@163.com.
Abstract:
To meet the demand of intelligent irrigation for accurate moisture sensing in the soil vertical profile, a soil profile moisture sensor was designed based on the principle of high-frequency capacitance. The sensor consists of five groups of sensing probes, a data processor, and some accessory components. Low-resistivity copper rings were used as components of the sensing probes. Composable simulation of the sensor’s sensing probes was carried out using a high-frequency structure simulator. According to the effective radiation range of electric field intensity, width and spacing of copper ring were set to 30 mm and 40 mm, respectively. A parallel resonance circuit of voltage-controlled oscillator and high-frequency inductance-capacitance (LC) was designed for signal frequency division and conditioning. A data processor was used to process moisture-related frequency signals for soil profile moisture sensing. The sensor was able to detect real-time soil moisture at the depths of 20, 30, and 50 cm and conduct online inversion of moisture in the soil layer between 0⁻100 cm. According to the calibration results, the degree of fitting (R²) between the sensor’s measuring frequency and the volumetric moisture content of soil sample was 0.99 and the relative error of the sensor consistency test was 0⁻1.17%. Field tests in different loam soils showed that measured soil moisture from our sensor reproduced the observed soil moisture dynamic well, with an R² of 0.96 and a root mean square error of 0.04. In a sensor accuracy test, the R² between the measured value of the proposed sensor and that of the Diviner2000 portable soil moisture monitoring system was higher than 0.85, with a relative error smaller than 5%. The R² between measured values and inversed soil moisture values for other soil layers were consistently higher than 0.8. According to calibration test and field test, this sensor, which features low cost, good operability, and high integration, is qualified for precise agricultural irrigation with stable performance and high accuracy.
Related Concept Videos
The Soil Ecosystem
Moisture Content and Bulking of Aggregate
When aggregates are exposed to rain or sit in stockpiles, they absorb moisture, which must be...
Group Design
Factorial Design
Layers of the Epidermis
Stratum Basale
Stratum basale, also known as the stratum germinativum, is the deepest layer of the epidermis. It is composed of a single layer of actively dividing cells called basal cells or basal keratinocytes. These cells constantly undergo cell division to replenish the upper layers of the epidermis. Additionally, melanocytes, which...
Design Example: Designing a Residential Plumbing System

