Related Experiment Video
Updated: Feb 9, 2026

Quantification and Whole Genome Characterization of SARS-CoV-2 RNA in Wastewater and Air Samples
Published on: June 30, 2023
Evaluation of different air dosing strategies to enhance H2S removal in microaerobic systems treating low-strength
M R Sousa1, C J S Oliveira1, J M Carneiro1
1Department of Hydraulic and Environmental Engineering, Federal University of Ceará, Fortaleza, Ceará, Brazil.
Abstract:
This study aimed to evaluate different air dosing strategies such as microaeration flow rates and air dosing points to enhance H2S removal in microaerobic systems treating low-strength wastewaters. Efficiency and stability of the reactors, as well as biogas quality, were assessed, and microbial community changes were evaluated using the PCR-DGGE technique. The results showed that the air dosing point affected the H2S concentration and that air dosing at the headspace promoted the highest H2S removal efficiency. The airflow rate also affected the process, since H2S concentration in the biogas was higher at 0.1 mL air.min-1 than at 0.3 mL air.min-1. The methane concentration in the biogas was also affected by both air dosing point and flow rate, since the lowest value was observed at the highest airflow rate of the headspace dosing point, due to dilution by the N2 influx applied to the system. The highest productivity and operational efficiency were observed at this air dosing point, with this airflow (HD0.3), which corroborates with the operational results and the ecological parameters, since the microaeration at this stage promoted high bacterial and archaeal species richness and diversity, optimum functional organization, high COD and H2S removal efficiencies.
More Related Videos
05:40Comparison of Scale in a Photosynthetic Reactor System for Algal Remediation of Wastewater
Published on: March 6, 2017
09:49Use of a Battery of Chemical and Ecotoxicological Methods for the Assessment of the Efficacy of Wastewater Treatment Processes to Remove Estrogenic Potency
Published on: September 11, 2016
Related Concept Videos
Self-Evaluation: Self-Enhancement and Self-Verification
Acid Strength and Molecular Structure
In the absence of any leveling effect, the acid strength of binary compounds of hydrogen with nonmetals (A) increases as the H-A bond strength decreases down a group in the periodic table. For group 17, the order of increasing acidity is HF < HCl < HBr < HI. Likewise, for group 16, the order of increasing acid strength is H2O < H2S < H2Se < H2Te. Across a row in the periodic table, the acid strength of binary hydrogen compounds increases with increasing...
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
Relation Between Tensile Strength and Compressive Strength of Concrete
The Equilibrium Binding Constant and Binding Strength
Dose Size and Dosing Frequency: Determination Methods