Related Experiment Video
Updated: Feb 8, 2026

Fabrication of Small Caliber Stent-grafts Using Electrospinning and Balloon Expandable Bare Metal Stents
Published on: October 26, 2016
Experimental and analytical evaluation on the mass transfer performance of braided stent-grafts
Wen Xue1, Liheng Gao1, Xuan Fang1
1Key Laboratory of Textile Science and Technology of Ministry of Education and College of Textiles, Donghua University, Shanghai 201620, China.
Abstract:
Endoleak and luminal loss related to blood permeation and microthrombus migration remain the main challenges in the aneurysm treatment, although stent-grafts have been widely applied. Stent-grafts provide a boundary to shield blood and microemboli transport, which are correlated with their mass transfer performance. Water permeability of vascular prostheses with woven and knitted structures has been analyzed and documented by many researchers, as well as oxygen and protein transfer. However, it is almost a total lack of blood and microemboli transfer along the braided stent-graft thickness direction. In this research, we provided a methodology for the vascular prostheses mass transfer evaluation. Braided stent-grafts in our former research were conducted on a self-developed testing system to investigate their blood permeability and microthrombus transfer behaviors. The pressure along wall thickness direction can be changed. Analytical models were also established based on pore parameters, making them applicative to different structures. Results revealed that the mass transfer behavior of stent-grafts was positively affected by porosity and pore diameter while negatively influenced by their thickness.
Related Concept Videos
Development of Analytical Methods
Experimental Determination of Chemical Formula
Analyte Adsorption and Distribution
Jung's Analytical Theory
Atomic Mass
Graphical and Analytic Representation of Sinusoids
The first step is measuring the peak-to-peak value, which is twice the amplitude of the sinusoid. This provides information about the maximum voltage swing of the waveform.
Secondly, the period and angular frequency are determined. The period is the time taken for one complete cycle of the waveform, while...

