Related Experiment Video
Updated: Feb 8, 2026
Author Spotlight: Developing a Safer and More Efficient Treatment Protocol for Wasting Marmoset Syndrome (WMS)
Published on: July 12, 2024
[Treatment of the Waste Gas Containing Methyl tert-Butyl Ether via a Biotrickling Filter]
Qi-Ying Chu1, Lu-Lu Yao1, Xiong-Biao Lü2
1College of Environment, Zhejiang University of Technology, Hangzhou 310032, China.
Abstract:
The performance and microbial communities of methyl tert-butyl ether (MTBE) treatment using a biotrickling filter (BTF) that was inoculated with activated sewage sludge were investigated. The BTF successfully started up within 23 days when the inlet concentration of MTBE was 100 mg·m-3 and empty bed retention time was 60 s, with 70% removal efficiency (RE). Under steady-state conditions, an elimination capacity (EC) and a mineralization ratio of 13.47 g·(m3·h)-1 and 68% were achieved, respectively. The ECmax was 21.03 g·(m3·h)-1 according to the Haldane model, and a KS of 0.16 g·m-3 and KI of 0.99 g·m-3 were obtained. High-throughput sequencing was used to identify the community structure of the mixed microbial consortium in the BTF. The results indicated that Methylibium sp. (11.33%) and Blastocatella sp. (9.95%) were the dominant bacteria.
Related Concept Videos
02:29Ethers from Alcohols: Alcohol Dehydration and Williamson Ether Synthesis
Ethers can be prepared from organic compounds by various methods. Some of them are discussed below,
Preparation of Ethers by Alcohol Dehydration
In this method, in the presence of protic acids, alcohol dehydrates to produce alkenes and ethers under different conditions. For example, in the presence of sulphuric acid, dehydration of ethanol at 413 K yields ethoxyethane, whereas it yields ethene at 443 K.
02:36Crown Ethers
01:27Passive Filters
Low-Pass Filters
Low-pass filters are designed to transmit signals with frequencies lower than the cutoff frequency, ωc, and attenuate those above it. The cutoff...
02:28Structure and Nomenclature of Ethers
Ethers are organic compounds with an ether functional group which is characterized by an oxygen atom connected to two — identical or different — alkyl, aryl, or vinyl groups. The C–O–C linkage in dimethyl ether — the simplest ether — has an approximately tetrahedral bond angle of 110.3 degrees. The oxygen atom is sp3- hybridized, with the C–O distance being about 140 pm.
Classification of Ethers
Based on their attached substituent...
01:25Active Filters
02:17Physical Properties of Ethers
An ether molecule has a net dipole moment due to the polarity of C–O bonds. Subsequently, boiling points of ethers are lower than those of alcohols of comparable molecular weight and slightly higher than those of hydrocarbons of comparable molecular weight (Table 1).
Ethers can act as hydrogen bond acceptors, making them more water-soluble than hydrocarbons, but since ethers cannot act as hydrogen bond donors, they are much less soluble in water than alcohols. Ethers are considered...