[Adsorption Characteristics of 2,4-D on UiO-66 from Wastewater]
Tian-Hao Ren1, Zhi-Lin Yang1, Lin Guo1
1Beijing Key Laboratory of Water Resource and Environmental Engineering, School of Water Resource and Environment, China University of Geosciences(Beijing), Beijing 100083, China.
Abstract:
With UiO-66 metal organic framework as the adsorbent, the influences of factors such as time, pH value, temperature on the adsorption were studied. The results showed that the adsorption effect was best at pH=4.0 for the adsorption system and the adsorption equilibrium time was 24 h. The equilibrium adsorption capacity increased with the increasing temperature and the optimal temperature should be controlled at 30℃. The adsorption of 2,4-D on UiO-66 followed Langmuir isotherm model and the adsorption kinetics could be better described by pseudo-second-order model. The intraparticle diffusion process was the rate-controlling step for adsorption processes. The results of thermodynamic calculations showed that ΔG<0, ΔH>0, ΔS>0. So the adsorption was a spontaneous, endothermic chemical process with increased randomness. The main interaction forces of adsorption were chemical bonding force and electrostatic interactions force. Results of the study suggested that UiO-66 had the potential ability for 2,4-D removal from wastewater.
More Related Videos
06:00Solvothermal Synthesis of MIL-96 and UiO-66-NH2 on Atomic Layer Deposited Metal Oxide Coatings on Fiber Mats
Published on: June 13, 2018
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for CuII Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Related Concept Videos
Analyte Adsorption and Distribution
Characteristics of Life
Characteristics of Fluids
Characteristics of Fluids
Fluids, which include both liquids and gases, are substances that deform continuously under shearing stress. For example, water and oil are liquids with molecules that can...
Characteristics of BJT
For input characteristics, the base-emitter voltage is varied, maintaining a constant collector-emitter voltage. This setup reveals a Shockley-type dependence of the collector current on...
Characteristics of JFET
The core of a JFET's operation is controlling drain current by modulating the gate-source voltage. When the drain and gate voltage are set to zero, the JFET exhibits no net current flow, representing a state of equilibrium. The drain current increases linearly as the...
