Related Experiment Video
Updated: Feb 8, 2026

Quasistatic Mechanical Testing for Computer-Aided Design and Manufacturing Occlusal Veneers Cemented to Milled Dentin Analog Material
Published on: December 20, 2024
[Effects and Mechanisms of In-situ Cement Solidification/Stabilization on a Pb-, Zn-, and Cd-Contaminated Site at
Hao-Yang Lü1,2, Yang Fei1, Ai-Qin Wang2
1Key Laboratory of Land Surface Pattern and Simulation, Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, Beijing 100101, China.
Abstract:
In order to evaluate the effects and mechanism of in-situ cement solidification/stabilization (S/S) on heavy metal contaminated soils, leaching tests, speciation analysis, and microscopic analysis were conducted after cement treatment of a Pb, Zn, and Cd contaminated site in Baiyin, China. The leaching test results showed that cement could effectively stabilize Cd and Zn, which could reduce 99.5%-100% and 96.6%-98.8% of H2SO4-HNO3 extractable Cd and Zn, respectively. However, the leaching concentration of Pb was 2.6-5.8 times higher than that before 5% cement treatment. After adding 8% cement, H2SO4-HNO3 extractable Cd and Zn were reduced by 99.6%-100% and 94.4%-97.9% respectively. Similarly, the leaching concentration of Pb was 1.9-12.5 times higher than that before 8% cement treatment. The results of sequential extraction test proposed by the European Community Bureau of Reference (BCR) showed that cement could transform acid extractable Cd and Zn to residual form and transform reducible fractions of Pb to oxidizable and residual form, increasing the stability of heavy metals in soil. The microscopic analysis results showed that Pb2+, Zn2+, and Cd2+ could participate in the process of cement hydration and form silicate minerals and hydroxides. In conclusion, cement could be an effective S/S agent to remediate heavy metal contaminated soils, and site characteristics and environmental conditions should also be considered during the construction process.
More Related Videos
Related Concept Videos
Hydration of Cement
Soundness of Cement
Contaminants and Errors
Another key consideration is determining the appropriate number of samples required to...
Portland Cement
Fineness of Cement
Direct...
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...

