[Combined Process of DNBF-O₃-GAC for Nitrogen and Phosphorus and Metabolite Advanced Removal]

To improve the quality of the tailings water from a wastewater treatment plant (WWTP), a denitrification biofilter (DNBF) with a composite filler composed of a new slow-release organic-carbon source (SOC-F), sponge iron, and activated carbon was tested. Studies were conducted in the combined process of DNBF-O₃-GAC to explore the efficiency of the advanced removal of nitrogen, phosphorus, and microbial metabolite by using synthetic effluent made from running water and chemicals. Corresponding comparative studies were conducted by using the secondary effluent from the WWTP. The microbial population structure in the biofilm of the denitrification biofilter was analyzed by adopting MiSeq high-throughput sequencing technologies. The results indicated that the combination process achieved high efficiency removal of nitrogen, phosphorus, and microbial metabolite. The average removal rate of NO₃^--N in the simulated and actual water period reached 88.87% and 79.99%, respectively; the average removal rate of TP reached 87.67% and 65.51%, respectively; and the average removal rate of UV₂₅₄ reached 45.51% and 49.23%, respectively. Each processing unit had different functions. The changes in NO₃^--N, TN, TP, and TFe mainly occurred in the denitrification biofilter, and the removal of UV₂₅₄ and the change in the three-dimensional fluorescence intensity mainly occurred in the ozone-activated carbon reactor. The cluster analysis at the genus level indicated that the denitrification system had sulfur autotrophic denitrifying bacteria and heterotrophic denitrifying bacteria. Sulfur autotrophic denitrification increased obviously in the actual water period when relatively lack of carbon sources, and the proportion of Thiobacillus increased from 7.44% to 29.62%. The complementary effect of sulfur autotrophic denitrification and heterotrophic denitrification had extended the use of the new slow-release carbon source.