Related Experiment Video
Updated: Feb 8, 2026

Aesthetically Enhanced Silica Aerogel Via Incorporation of Laser Etching and Dyes
Published on: March 12, 2021
Enhanced Transmission and Self-Cleaning of Patterned Sapphire Substrates Prepared by Wet Chemical Etching Using
Gui-Gen Wang1,2, Zhao-Qing Lin1, Dong-Dong Zhao1
1Shenzhen Key Laboratory for Advanced Materials, Shenzhen Graduate School , Harbin Institute of Technology , Shenzhen 518055 , P. R. China.
Abstract:
Highly transparent and superhydrophilic sapphire with surface antireflective subwavelength structures were prepared by wet etching using colloidal monolayer silica masks. The film thicknesses of the silica masks were adjusted by the volume concentrations of polystyrene spheres. The evolution of etching morphologies of sapphire was studied, and antireflective concave pyramid nanoarrays on sapphire substrates were designed by calculation and were then prepared. The transmission and wettability of as-obtained patterned sapphire substrates were also investigated. As for sapphire with optimum surface concave micropyramid arrays, average visible transmittance can reach 91.7%, which is apparently higher than that of flat sapphire (85.5%). Moreover, the concave pyramid arrays can significantly increase the surface hydrophilicity of sapphire, exhibiting a water contact angle of 12.6° compared with 62.7° of flat sapphire. The proposed method can be an excellent strategy for preparing antireflective and self-cleaning concave micropyramid subwavelength structures on sapphire without complicated equipment and expensive raw materials.
Related Concept Videos
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Masking and Demasking Agents
There are many masking agents, such as cyanide, fluoride, triethanolamine, thiourea, and 2,3-bis(sulfanyl)propan-1-ol (formerly 2,3-dimercapto-1-propanol), with the masking agent chosen based on...
Administering Oxygen by Mask
Administering oxygen by mask is a common nursing intervention that provides supplemental oxygen to patients with respiratory distress or chronic lung conditions. This procedure involves delivering oxygen at a specified rate through a face mask connected to an oxygen source.
Equipment
The equipment necessary for this procedure includes:
Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...
Chemical Formulas
Chemical Equations

