Chemical Composition and Emissions Factors for Cookstove Startup (Ignition) Materials

Air pollution from cookstoves creates a substantial human and environmental health burden. A disproportionate fraction of emissions can occur during stove ignition (startup) compared to main cooking, yet startup material emissions are poorly quantified. Laboratory tests were conducted to measure emissions from startups using kerosene, plastic bags, newspaper, fabric, food packaging, rubber tire tubes, kindling, footwear, and wood shims. Measured pollutants included: fine particulate matter mass (PM_2.5), PM_2.5 elemental and organic carbon, methane, carbon monoxide, carbon dioxide, benzene, and formaldehyde. Results demonstrate substantial variability in the measured emissions across materials on a per-startup basis. For example, kerosene emitted 496 mg PM_2.5 and 999 mg CO per startup, whereas plastic bags emitted 2 mg PM_2.5 and 30 mg CO. When considering emissions on a per-mass basis, the ordering of materials from highest-to-lowest emissions changes, emphasizing the importance of establishing how much material is needed to start a stove. The proportional contribution of startups to overall emissions varies depending on startup material type, stove type, and cooking event length; however, results demonstrate that startup materials can contribute substantially to a cookstove's emissions. Startup material choice is especially important for cleaner stove-fuel combinations where the marginal benefits of reduced emissions are potentially greater.