Related Experiment Video
Updated: Feb 7, 2026

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Removal of heavy metals from landfill leachate using zero valent iron and granular activated carbon
Stefania Bilardi1, Paolo Salvatore Calabrò1, Rosa Greco1
1Department of Civil, Energy, Environmental and Materials Engineering (DICEAM), Mediterranea University of Reggio Calabria, Reggio Calabria, Italy.
Abstract:
The possibility of a landfill leachate pre-treatment, aiming at heavy metals removal, by means of either zero valent iron (ZVI), or granular activated carbon (GAC) or by a mixture of the two materials, was investigated in this paper through batch and column tests. For this purpose, a synthetic landfill leachate containing heavy metals (i.e. Cu, Ni, Zn), chloride, sulphates, ammonium and organic matter was prepared. Batch tests results demonstrated the efficiency of ZVI, GAC and ZVI/GAC mixture in heavy metals removal (efficiency > 90%) and their negligible effect on the other contaminants. Column tests showed as pure ZVI is by far more efficient than pure GAC in the long term. The influence of humic acids (HA) on the reactive and hydraulic behaviour of ZVI was also studied through column tests. The presence of HA in the leachate caused a reduction of ZVI removal efficiency and a considerable decrease in its hydraulic conductivity. Results of a column test carried out using the ZVI/GAC granular mixture showed as the removal efficiency over time ranges from 100% to 89% for Cu, from 93% to 80% for Ni and from 98% to 95% for Zn. The use of a filter filled with the ZVI/GAC mixture could find application for leachate pre-treatment having the objective of removing heavy metals prior the final co-treatment with municipal wastewater minimizing adverse side effect on the process (e.g. transfer of heavy metals in the excess sludge to be used in agriculture).
More Related Videos
10:20Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae
Published on: July 10, 2015
07:14Author Spotlight: Experimental Approaches for the Synthesis of Low-Valent Metal-Organic Frameworks from Multitopic Phosphine Linkers
Published on: May 12, 2023
Related Concept Videos
The Carbon Cycle
Bonding in Metals
Metallic Solids
All metallic solids exhibit high thermal and electrical conductivity, metallic luster, and malleability....
Alkali Metals
Table 1: Properties of the alkali metals
Carbon Skeletons
Metal-Ligand Bonds
In these complexes, transition metals form coordinate covalent bonds, a kind of Lewis acid-base interaction in which both of the electrons in the bond are contributed by a donor (Lewis base) to an electron acceptor (Lewis acid). The Lewis acid in...