Applications of left ventricular strain measurements to patients undergoing chemotherapy

Suparna C Clasen1, Marielle Scherrer-Crosbie

  • 1Cardio-oncology Program and Cardiac Ultrasound Laboratory, Division of Cardiology, Department of Medicine, Hospital of the University of Pennsylvania, Philadelphia, Pennsylvania, USA.

Abstract

Related Concept Videos

Measurements of Strain01:27

Measurements of Strain

Strain quantifies the deformation of a material under force, typically measured as normal strain, which represents the change in length when compared with the original length. Electrical strain gauges are used for enhanced accuracy. These devices consist of a conductive wire mounted on a paper backing that adheres to the material's surface. These gauges operate on the piezoresistive effect, where the wire's electrical resistance changes in response to mechanical deformation. The strain...
2.6K
Chemotherapy-Induced Nausea and Vomiting: Cannabinoids01:21

Chemotherapy-Induced Nausea and Vomiting: Cannabinoids

Tetrahydrocannabinol (THC) is a phytocannabinoid that primarily interacts with the CB1 receptor, a type of G protein-coupled receptor (GPCR) predominantly in and around the chemoreceptor trigger zone (CTZ) and emetic center. THC also blocks the serotonin receptor activity in the dorsal vagal complex (DVC) by inhibiting serotonin release. THC exerts its anti-emetic effects through these interactions, which are beneficial for patients undergoing chemotherapy.
Two synthetic agonists of THC,...
790
Thermal Strain01:19

Thermal Strain

Thermal strain is a concept that arises when we consider how temperature changes affect structures. Unlike the conventional assumption that structures remain constant under load, real-world scenarios often involve temperature fluctuations that can significantly impact these structures. Consider a homogeneous rod with a uniform cross-section resting freely on a flat horizontal surface. If the rod's temperature increases, the rod elongates. This elongation is proportional to the temperature...
2.9K
Shearing Strain01:20

Shearing Strain

The shearing strain represents a cubic element's angular change when subjected to shearing stress. This type of stress can transform a cube into an oblique parallelepiped without influencing normal strains. The cubic element experiences a significant transformation when exposed solely to shearing stress. Its shape alters from a perfect cube into a rhomboid, clearly demonstrating the effect of shearing strain. The degree of this strain is considered positive if it reduces the angle between the...
1.4K
Strain Energy01:13

Strain Energy

Strain energy is a fundamental concept in the field of materials science and structural engineering, describing the energy absorbed by a material or structure when it is deformed under load.
Consider a rod that is fixed at one end and subjected to an axial force at the free end. This axial force induces stress within the rod, leading to its elongation. As the axial force increases, so does the elongation of the rod, illustrating a direct relationship between the force applied and the resulting...
1.0K
Problem Solving on Stress and Strain01:22

Problem Solving on Stress and Strain

Stress is a quantity that describes the magnitude of a force that causes deformation, generally defined as internal force per unit area. When forces pull on an object and cause its elongation, like the stretching of an elastic band, it is called tensile stress. When forces cause the compression of an object, it is known as compressive stress. When an object is being squeezed uniformly from all sides, like a submarine in the depths of the ocean, we call this kind of stress bulk stress (or volume...
2.0K