Related Experiment Video
Updated: Feb 7, 2026

Informatic Analysis of Sequence Data from Batch Yeast 2-Hybrid Screens
Published on: June 28, 2018
Agave tequilana bagasse for methane production in batch and sequencing batch reactors: Acid catalyst effect, batch
Luz Breton-Deval1, Hugo O Méndez-Acosta1, Víctor González-Álvarez1
1Departamento de Ingeniería Química, CUCEI-Universidad de Guadalajara, Blvd. M. García Barragán 1451, C.P. 44430, Guadalajara, Jalisco, Mexico.
Abstract:
Agave tequilana bagasse is the main solid waste of the tequila manufacturing and represents an environmental issue as well as a potential feedstock for biofuel production due to its lignocellulosic composition and abundance. In this contribution, this feedstock was subjected to pretreatments with HCl and H2SO4 for sugar recovery and methane was produced from the hydrolysates in batch and sequencing batch reactors (AnSBR). Sugar recovery was optimized by using central composite designs at different levels of temperature, acid concentration and hydrolysis time. Results showed that at optimal conditions, the HCl pretreatment induced higher sugar recoveries than the H2SO4 one, 0.39 vs. 0.26 g total sugars/g bagasse. Furthermore, the H2SO4 hydrolysate contained higher concentrations of potential inhibitory compounds (furans and acetic acid). Subsequent anaerobic batch assays demonstrated that the HCl hydrolysate is a more suitable substrate for methane production; a four-fold increase was found. A second optimization by using HCl as acid catalyst and methane production as the response variable demonstrated that softer hydrolysis conditions are required to optimize methane production as compared to sugar recovery (1.8% HCl, 119 °C and 103min vs. 1.9% HCl, 130 °C and 133min). This softer conditions were used to feed an AnSBR for 110 days and evaluate its stability at three different cycle times (5, 3 and 2 days). Results showed stable reactor performances at cycle times of 5 and 3 days, obtaining the highest methane yield and production at 3 days, 0.28 NL CH4/g-COD and 1.04 NL CH4/d respectively. Operation at shorter cycle times is not advised due to microbial imbalance.
Related Concept Videos
Drug Product Stability
BIBO stability of continuous and discrete -time systems
To determine the BIBO stability, the convolution integral is utilized when a bounded continuous-time input is applied to a Linear Time-Invariant (LTI) system....
Products of the Citric Acid Cycle
RNA Stability
Nuclear Stability
To hold positively charged protons together...
mRNA Stability and Gene Expression
Cis-acting Elements involved in mRNA stability

