Related Experiment Video
Updated: Feb 7, 2026

Simulation of Early Earth Hydrothermal Chimneys in a Thermal Gradient Environment
Published on: February 27, 2021
Thermal monitoring and analysis of the large-scale field earth-dam breach process
Chien-Yuan Chen1, Su-Chin Chen2, Kuan-Hua Chen3
1Department of Water and Resources Engineering, National Chiayi University, 60004, Chiayi City, Taiwan, Republic of China. chienyuc@mail.ncyu.edu.tw.
Abstract:
Thermal imaging is a nondestructive testing method for monitoring internal material changes that are indicated by changes in an object's surface temperature. In this study, field observation using thermographs was applied to monitor and analyze the breach process of large-scale earth dams. The earth dam test site was Landao Creek in Nantou County, Taiwan. Four field tests were performed to monitor and analyze a single earth dam and two successive earth dams. Ponding first occurred at the lowland of the riverbed upstream, and base seepage occurred at the base of the dam downstream; overtopping failure soon followed. Earth-dam failure mode is affected by the topographic characteristics of the riverbed; specifically, lowland areas are prone to ponding upstream, which causes piping and seepage downstream as well as subsequent breaches. Ponding and piping cause water seepage and soil wetting, which are reflected in lower surface temperatures recorded on thermographs. Thermographs can monitor changes in surface temperature to evaluate the potential failure modes of dams. Dam surfaces with large temperature variations may be potential failure areas. If confirmed, this fact may prove useful for failure-mode prediction. This paper proposes a monitoring index to reflect the temperature changes in a given period, and this study verified it empirically.
More Related Videos
Related Concept Videos
Conditions on Early Earth
pH Scale
Acceleration due to Gravity on Earth
The acceleration of an object close to the Earth, because of the Earth's gravitational pull, is called the acceleration due to gravity. It is...
Thermal expansion and Thermal stress: Problem Solving
To solve the problem, first, identify the known and unknown quantities. The initial length (L) of the bridge is 1275 m, the coefficient of linear expansion (α) for steel is 12 x 10-6/°C, and the change in temperature (ΔT) is 55...
Design Example: Creating a Hydraulic Model of a Dam Spillway
Thermal Strain

