Related Experiment Video
Updated: Feb 7, 2026

Assessment of Thermal Damage from Robot-Drilled Craniotomy for Cranial Window Surgery in Mice
Published on: November 11, 2022
Effect of drilling direction and depth on thermal necrosis during tibia drilling: An in vitro study
Seifollah Gholampour1, Ehsan Shakouri2, Hossein Haghighi Hassanali Deh2
1Department of Biomedical Engineering, Islamic Azad University-North Tehran Branch, Tehran, Iran.
Abstract:
Thermal necrosis is one of the main concerns in bone drillings. This study has been designed with the aim of improving the surgeons' knowledge on how to reduce thermal necrosis in tibia drilling with various depths and directions. A drilling machine was developed, which made the direct transfer of gas coolants into the drilling site during drilling possible. Results indicated that 2000 r/min is the most proper rotational speed for minimizing thermal necrosis. Changing the drilling direction from radial to longitudinal raised the temperature at drilling site. Increasing the drilling depth from 8 to 50 mm raised the temperature by at least 22.5%. Increasing the drilling depth up to 50 mm raised the drilling site temperature above the threshold temperature of tibia thermal necrosis as well as the temperature durability at the drilling site. However, in contrast to conventional cooling modes, using gas coolants, especially CO2, brought the temperature to a level less than the threshold temperature of tibia thermal necrosis and reduced the durability of temperature at the drilling site by at least 1 minute. Using the drilling machine developed in this study and CO2 coolant, orthopedic surgeons can perform tibia drilling in various directions up to the depth of 50 mm without the risk of thermal necrosis since the internal gas coolants, due to their direct contact with the drilling site and the rapid discharge of the chips, reduce the temperature increase in tibia caused by changing the drilling depth and the drilling direction from radial to longitudinal, greatly.
More Related Videos
15:11Surgical Fixation of Sternal Fractures: Preoperative Planning and a Safe Surgical Technique Using Locked Titanium Plates and Depth Limited Drilling
Published on: January 5, 2015
04:26Author Spotlight: A Reproducible and Efficient Method for Accessing Porcine Brain via Craniectomy
Published on: July 5, 2024
Related Concept Videos
Necrosis
Morphological Manifestations of Necrosis
Necrotic cells show different types of morphological appearance depending on the type of tissue and infection. In coagulative necrosis, cells become...
Bones of the Lower Limb: Tibia and Fibula
Uniform Depth Channel Flow
Thermal expansion and Thermal stress: Problem Solving
To solve the problem, first, identify the known and unknown quantities. The initial length (L) of the bridge is 1275 m, the coefficient of linear expansion (α) for steel is 12 x 10-6/°C, and the change in temperature (ΔT) is 55...
Depth Perception and Spatial Vision
Thermal Strain