Related Experiment Video
Updated: Feb 7, 2026

Quantitative Analysis of Vacuum Induction Melting by Laser-induced Breakdown Spectroscopy
Published on: June 10, 2019
[Quantitative Analysis of Cr in Soil with Laser Induced Breakdown Spectroscopy Combined With Multivariate
Abstract:
Laser-induced breakdown spectroscopy (LIBS) was used to calibrate the concentration of Cr in soils combined with Support Vector Machine. The Nd:YAG pulse laser with the wavelength of 1 064 nm was used as the excitation source. The grating spectrometer and the charge couple device were used as spectral separation device and the spectral detection device. The multiple linear regression and support vector machine were adopted to make quantitative analysis on Cr in soils respectively. The result indicate that the multiple linear regression can get more accurate informination of the spectral lines: the correlation coefficient is increased from 0.689 to 0.980 compared with conventional quantitative method. Thereofre, the the accuracy of quantitative analysis is increased. The slope about calibration curve with support vector machine of test set is nearly about 1 and the correlation coefficient is 0.998, the relative errors for the test set all are lower than 2.57%, the quantitative analysis results about support vector machine are better than the results combined with the conventional quantitative method and the multiple linear regression. The support vector machine can correct the matrix effect and improve the accuracy of prediction on the concentration of Cr in soil.
More Related Videos
08:53Dependence of Laser-induced Breakdown Spectroscopy Results on Pulse Energies and Timing Parameters Using Soil Simulants
Published on: September 23, 2013
10:17Laser-induced Breakdown Spectroscopy: A New Approach for Nanoparticle's Mapping and Quantification in Organ Tissue
Published on: June 18, 2014
Related Concept Videos
The Soil Ecosystem
Quantitative Analysis
In quantitative analysis, two key measurements are made: the sample quantity and a property proportional to the amount of the analyte (the substance being analyzed). This forms the basis of the...
Glassware Calibration
Volumetric flasks: Volumetric flasks are designed to prepare aqueous solutions of precise volumes accurately with a calibration line on the neck. To calibrate a volumetric flask, it is important to fill it with distilled...
Instrument Calibration
Analytical Balance Calibration
An analytical balance measures mass and requires regular calibration to...
Calibration Curves: Correlation Coefficient
Plotting and Calibrating the Root Locus
The maximum gain occurs at the breakaway points between open-loop poles on the real axis, while the minimum gain is...