Output-only modal analysis of wind turbine tower based on vibration response under emergency stop

The identification technique of output-only modal parameters is proposed for the large wind turbine tower under emergency stop. Compared with the response of regular operating conditions, the immediate tower structural response under emergency stop much more resembles a state of free vibration, which is more appropriate for the modal identification of the wind turbine tower. The vibration response is measured in the nacelle, which is easy to perform in the field modal test. The variational mode decomposition (VMD) is applied to decompose the vibration response into several band-limited intrinsic mode functions. The free responses of decomposed functions are extracted by applying the random decrement technique (RDT). Finally, the modal damping ratio and natural frequency are identified from each free modal response by using the Hilbert transform method. Simulations and a 1.5 MW wind turbine field modal test results verify the effectiveness of the proposed identification method. The main modal parameters of wind turbine, including weak modes, are effectively extracted by using output-only vibration responses under emergency stop. The modal parameter identification method is provided for the large wind turbine structure under the engineering condition.