[The Enhancement Research of Magnetic Stirring with Laser Irradiation Aqueous Solution on ICP Source Radiation]

At present, the way to introduce the sample into the inductively coupled plasma atomic emission spectrometry (ICP-AES) light source is still in the form of solution. In order to improve the treatment effect of the aqueous solution and change its physical properties, the surface tension and viscosity under different experimental conditions were measured with magnetic stirring combined with laser irradiation. . The treated samples were introduced into the inductively coupled plasma (ICP) to measure the spectral line intensity, signal-to-background ratio, excitation temperature and electron density emitted by the ICP source. The experimental results showed that: when the magnetic stirrer rotate speed was 1 197 r·min-1, the laser power density was 0.227 6 W·cm-2 and irradiation for 15 min, the surface tension and viscosity of the solution were decreased by 27.85% and 8.66% respectively than those of the untreated solution. As to the element spectral lines of As 188.980 nm, Cd 214.439 nm, Cr 267.716 nm, Cu 324.754 nm, Hg 253.652 nm and Pb 220.353nm: the intensity was enhanced 32.07%, 65.36%, 18.27%, 32.29%, 19.38% and 54.28%; the signal-to-background ratio increased by 25.13%, 60.97%, 18.18%, 27.69%, 21.11% and 48.93%, respectively. The enhancement of the plasma radiation was explained to a certain extent by measuring the excitation temperature and electron density of the plasma. The processing method of the aqueous solution can effectively improve the spectral intensity and signal-to-background ratio of the ICP. Compared with the laser irradiation aqueous solution separately, this method significantly shortened the processing time, improve the efficiency. This method is simple, with no secondary pollution in the treatment of the sample solution, convenient popularization and use.