Enhanced Electroluminescence from Organic Light-Emitting Diodes with an Organic-Inorganic Perovskite Host Layer

The development of host materials with high performance is essential for fabrication of efficient and stable organic light-emitting diodes (OLEDs). Although host materials used in OLEDs are typically organics, in this study, it is shown that the organic-inorganic perovskite CH₃ NH₃ PbCl₃ (MAPbCl₃ ) can be used as a host layer for OLEDs. Vacuum-evaporated MAPbCl₃ films have a wide band gap of about 3 eV and very high and relatively balanced hole and electron mobilities, which are suitable for the host material. Photoluminescence and electroluminescence take place through energy transfer from MAPbCl₃ to an organic emitter in films. Incorporation of an MAPbCl₃ host layer into OLEDs leads to a reduction of driving voltage and enhancement of external quantum efficiency as compared to devices with a conventional organic host layer. Additionally, OLEDs with an MAPbCl₃ host layer demonstrate very good operational stability under continuous current operation. These results can be extensively applied to organic- and perovskite-based optoelectronics.