Process optimization of ultrasound-assisted treatment for soya bean protein isolate/polyacrylamide composite film

In this paper, composite films composed of soya bean protein isolate (SPI) and polyacrylamide (PAM) were prepared under variations of ultrasonic power, treatment time and heating temperature. The effects of the major processing parameters related to ultrasonic-assisted treatment were evaluated and optimized through the single-factor analysis and Box-Behnken design (BBD), respectively, when the tensile strength of composite films was considered as the response value. The single-factor analysis was carried out to study the effects of ultrasonic power, treatment time and heating temperature on the viscosity and cohesion of the slurry and the tensile strength of SPI/PAM composite films, which also provided a reasonable data range of each factor for further optimization. Experiment results indicated that these three factors play a significant role in the tensile strength of films. Then BBD was applied to optimize the treatment conditions of these three factors, using the tensile strength of films as the response value. According to the interactive second-order polynomial model of three factors and the three-dimensional response surface, the maximum tensile strength of films was obtained under the optimal condition. To verify the reliability of the model, the experiment with the optimal condition was conducted, and results demonstrated that the observed tensile strength was in agreement with the predicated one. Also, the morphology and water solubility of the films showed that the film can be coated on the yarns evenly and removed clearly.