High-power passively Q-switched 2.0 μm all-solid-state laser based on a MoTe₂ saturable absorber

In this article, a high-power diode-end-pumped passively Q-switched (PQS) Tm:YAP laser is reported with novel two-dimension (2D) molybdenum ditelluride (MoTe₂) as a saturable absorber (SA). By using the open-aperture Z-scan method, the saturable absorption properties around 2.0 μm was characterized with a saturable fluence of 2.26 μJ∕cm² and a modulation depth of 6.0% for the as-prepared MoTe₂ SA. The band structure of MoTe₂ with the introduction of Te vacancies is simulated by the DFT method, and the results indicate that the bandgap can be reduced with the vacancies in a suitable range. The shortest pulse width of 380 ns was obtained with an average output power of 1.21 W at a repetition rate of 144 kHz, corresponding to a maximum single pulse energy of 8.4 µJ and peak power of 22.2 W. It is the first presentation of MoTe₂ as the saturable absorber in 2.0 μm solid-state pulse laser generation and the pulse width is the shortest among 2.0 μm solid-state lasers passive Q-switched with transitional metal dichalcogenides (TMDs) SAs to the best of our knowledge. The results indicated that MoTe₂ should be an excellent optical modulator for high repetition rate and short pulsed laser generation in a broadband spectral range.