Related Experiment Video
Updated: Feb 6, 2026

Capturing Actively Produced Microbial Volatile Organic Compounds from Human-Associated Samples with Vacuum-Assisted Sorbent Extraction
Published on: June 1, 2022
Evaluation of a Passive Sampling Method for Long-Term Continuous Monitoring of Volatile Organic Compounds in Urban
Robert M Healy1, Julie Bennett1, Jonathan M Wang1
1Environmental Monitoring and Reporting Branch , Ontario Ministry of the Environment, Conservation and Parks , Toronto , Ontario M9P 3V6 , Canada.
Abstract:
Environmental Protection Agency Method 325 was developed for continuous passive monitoring of volatile organic compounds (VOCs), particularly benzene, at petroleum refinery fencelines. In this work, a modified version of the method was evaluated at an Ontario near-road research station in winter to assess its suitability for urban air quality monitoring. Samples were collected at 24 hour and 14 day resolution to investigate accuracy for different exposure times. Tubes were analyzed by thermal desorption-gas chromatography-mass spectrometry, and 11 VOCs were quantified, including aromatic air toxics. The same VOCs were simultaneously monitored using traditional canister sampling for comparison, and a subset of four were also monitored using a novel miniature gas chromatograph. Good agreement (within 10%) was observed between the 14 day passive tube samples and the canister samples for benzene. However, field-calibrated uptake rates were required to correct passive tube concentrations for less volatile aromatics. Passive tube deployment and analysis is inexpensive; sampling does not require power, and accurate measurements of benzene are demonstrated here for an urban environment. The method is expected to be advantageous for the generation of long-term continuous benzene datasets suitable for epidemiological research with greater spatial coverage than is currently available using traditional monitoring techniques.
More Related Videos
08:10Fizzy Extraction of Volatile Organic Compounds Combined with Atmospheric Pressure Chemical Ionization Quadrupole Mass Spectrometry
Published on: July 14, 2017
07:13Swabbing the Urban Environment - A Pipeline for Sampling and Detection of SARS-CoV-2 From Environmental Reservoirs
Published on: April 9, 2021
Related Concept Videos
Organic Compounds
Sampling Continuous Time Signal
In the...
Volatilization
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
Convenience Sampling Method
Convenience sampling is a non-random method of sample selection; this method selects individuals that are easily accessible and may result in biased data. For example, a marketing...
Passive Filters
Low-Pass Filters
Low-pass filters are designed to transmit signals with frequencies lower than the cutoff frequency, ωc, and attenuate those above it. The cutoff...