Interaction between ferruginous clay sediment and an iron-reducing hyperthermophilic Pyrobaculum sp. in a terrestrial

Lucy C Stewart1, Karen Houghton2,3, Carlo R Carere2,4

  • 1Marine Geoscience, GNS Science, 1 Fairway Dr, Lower Hutt 5010, New Zealand.

Related Concept Videos

Hyperthermophilic Bacteria01:21

Hyperthermophilic Bacteria

Domain Bacteria includes some unique hyperthermophilic species. They exhibit remarkable adaptations that enable survival in extreme environments.Thermotoga species are rod-shaped, gram-negative, non-sporulating hyperthermophiles that form a sheath-like envelope called a toga. They ferment sugars or starch, producing lactate, acetate, CO₂, and H₂, and can also grow via anaerobic respiration using H₂ and ferric iron. Found in hot springs and hydrothermal vents, over 20% of their...
560
Frequency of Spring-Mass System01:17

Frequency of Spring-Mass System

One interesting characteristic of the simple harmonic motion (SHM) of an object attached to a spring is that the angular frequency, and the period and frequency of the motion, depend only on the mass and the force constant of the spring, and not on other factors such as the amplitude of the motion or initial conditions. We can use the equations of motion and Newton's second law to find the angular frequency, frequency, and period.
Consider a block on a spring on a frictionless surface. There...
7.8K
Hot Weather Concreting01:20

Hot Weather Concreting

Concreting at elevated temperatures accelerates the hydration process, leading to quicker setting but potentially reducing the long-term strength of the concrete structure. Additionally, low air humidity fosters rapid moisture loss from the concrete, resulting in reduced workability, pronounced plastic shrinkage, and a higher likelihood of crazing.
Mitigating the heat increase in concrete can be economically achieved by shading aggregate stockpiles to prevent heating from solar radiation,...
316
Reducing Line Loss01:18

Reducing Line Loss

In a three-phase circuit, line loss is an indicator of energy dissipated as heat due to the resistance of transmission lines. To address this, incorporating transformers into the system—a step-up transformer at the source and a step-down transformer at the load—is a strategic solution. Two three-phase transformers are introduced to improve this.
With a step-up transformer at the source, the voltage is increased, thereby reducing the current in the transmission lines since power loss in...
390
Masonry in Cold and Hot Weather Conditions01:21

Masonry in Cold and Hot Weather Conditions

In cold weather, masonry construction requires specific precautions to ensure mortar does not freeze before curing, as this can significantly weaken its strength and watertightness. Mortar temperature should be maintained between 60°F and 80°F to support proper hydration and curing. Below 40°F, mortar water must be heated, but should not exceed 120°F as high temperatures can reduce mortar's compressive and bond strength.
Other key practices include keeping masonry units...
349
Methods of reducing fever01:22

Methods of reducing fever

The signs and symptoms of fever include hot and dry skin, flushed face, thirst, muscle aches, anorexia, headache, tachycardia, tachypnea, and fatigue. Elevated body temperature is reduced using two methods: pharmacological and nonpharmacological. Proper identification and treatment of the root cause of a fever is of utmost importance.
Pharmacological Methods of Reducing Fever:
1.4K