Related Experiment Video
Updated: Feb 6, 2026

Large Area Substrate-Based Nanofabrication of Controllable and Customizable Gold Nanoparticles Via Capped Dewetting
Published on: February 26, 2019
Thermal modelling of controlled scalp hypothermia using a thermoelectric cooling cap
Mark Baldry1, Victoria Timchenko1, Chris Menictas1
1School of Mechanical and Manufacturing Engineering, University of New South Wales, Kensington 2033, NSW, Australia.
Abstract:
This study presents a novel, thermoelectric cryotherapy cap that aims to provide effective and controlled scalp cooling to prevent hair loss for chemotherapy patients. The cap's design consists of multiple thermoelectric coolers (TECs) evenly spaced and bonded to a soft thermal interface material, tightly fitted to a patient's head. A numerical model is developed to assess the performance of alternative cap designs in relation to their ability to achieve hair follicle hypothermia. Under ideal conditions, 26.5 W of heat removal from the scalp is required to achieve the clinically-significant follicle temperature target of 22 °C. Temperature maps of the subcutaneous tissue are generated to visualise the development of hypothermic follicles, and thereby assess the effectiveness of the cap design. Transient studies show that cooling to the therapeutic temperature can be achieved within 40 min. To avoid the possibility of cold-induced tissue damage, individual thermoelectric cooling modules should not be operated at a cooling flux beyond approximately 3175 W/m2. This may be achieved with 38 modules evenly spaced in a checkerboard arrangement, each providing 0.7 W of cooling to the scalp.
Related Concept Videos
Heating and Cooling Curves
For instance, the addition of heat raises the temperature of a solid; the amount of heat absorbed depends on the heat capacity of the solid (q = mcsolidΔT). According to thermochemistry, the relation between the amount of heat absorbed or released by a substance, q, and its...
Thermal expansion and Thermal stress: Problem Solving
To solve the problem, first, identify the known and unknown quantities. The initial length (L) of the bridge is 1275 m, the coefficient of linear expansion (α) for steel is 12 x 10-6/°C, and the change in temperature (ΔT) is 55...
Thermal Strain
Thermal Expansion
Thermal Stress
Temperature and Thermal Equilibrium
The concept of temperature has evolved from the common concepts of hot and cold. The scientific definition of temperature explains more than just our sense of hot and cold. Temperature is operationally defined as the quantity measured with a thermometer. Furthermore, temperature is...

