Related Experiment Video
Updated: Feb 6, 2026

A Protocol for Detecting and Scavenging Gas-phase Free Radicals in Mainstream Cigarette Smoke
Published on: January 2, 2012
Efficiencies and noise levels of portable surgical smoke evacuation systems
Hans-Martin Seipp1, Thomas Steffens1, Janine Weigold1
1a Department of Life Science Engineering , University of Applied Sciences , Giessen , Germany.
Abstract:
Surgical smoke resulting from electrocauterization is a health risk for operating room personnel. The U.S. National Institute for Occupational Safety and Health recommends the use of local exhaust ventilation such as a portable smoke evacuation system to reduce surgical smoke, but its efficiency has never been assessed under experimental conditions. In this study, particle filtration efficiencies of five commercially available smoke evacuation systems were investigated in a model operating room. Two cutting angles, the devices' suction capacities, three unidirectional displacement flow rates, and the noise exposures were considered. Results demonstrated that portable smoke evacuation systems reduce surgical smoke up to 99% under optimal conditions. A cutting angle of 45°, the device's maximum suction capacity, and a unidirectional displacement flow rate of 10,500 m³/hr were advantageous. Sound levels ranged between 51-69 dBA and exceeded recommended threshold limits, if used with medium or maximum suction capacity. Hence, portable smoke evacuation systems are beneficial and are recommended. However, a combination with general unidirectional room ventilation and a strict limitation of the use of electrocauterization is strongly advised.
Related Concept Videos
Levels of Organization
Molecules Are Composed of Atoms, and Biomolecules Are Assembled from Molecules:
The most basic levels include atoms, molecules, and biomolecules. Atoms, the smallest unit of ordinary matter, are composed of a nucleus and electrons. Molecules...
Leveling Effect
High-Level and Low-Level Awareness
Second Order systems II
First Order Systems
When a first-order system is subjected to a unit-step input, its response is characterized by its transfer function. By applying the Laplace transform of the unit-step input to the transfer function, expanding the...
Second Order systems I
By reinterpreting the system, one can derive the closed-loop transfer function, which...

