Inverse design and demonstration of an ultracompact broadband dual-mode 3 dB power splitter

An ultracompact broadband dual-mode 3 dB power splitter using inverse design method for highly integrated on-chip mode (de) multiplexing system is proposed and experimentally demonstrated. A dual-mode convertor based on subwavelength axisymmetric three-branch waveguide is utilized to convert TE₀ and TE₁ to three intermediate fundamental modes. The axisymmetric topology constraint of the nanostructures enables the optimized device to achieve a strict 50:50 splitting ratio over a broad wavelength range from 1.52 to 1.60 µm. The fabricated device occupied a compact footprint of only 2.88 µm × 2.88 µm. The measured average excess losses and crosstalks for both modes were respectively less than 1.5 dB and -20 dB from 1.52 to 1.58 µm for both TE₀ and TE₁, which are consistent with the numerical simulations.