Related Experiment Video
Updated: Feb 5, 2026

Fabrication and Testing of Catalytic Aerogels Prepared Via Rapid Supercritical Extraction
Published on: August 31, 2018
The effect on ozone catalytic performance of prepared-FeOOH by different precursors
Cheng Wang1, Aimin Li1, Chendong Shuang1
1State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing, 210023, PR China.
Abstract:
In this study, different precursors were used to prepare FeOOH and the ozonation catalytic activity was s investigate by using ibuprofen as the degradation substrate. It could be found that FeOOH prepared from ferric sulfate performed higher activity. Subsequently, the catalysts were characterized by X-ray diffraction, Fourier transform infrared spectrometer, scanning electron microscope and N2 adsorption-desorption techniques. X-ray diffraction and Fourier transform infrared spectrometer showed that the synthesized FeOOH consisted of α-FeOOH and β-FeOOH mainly. Scanning electron microscope showed that their appearance and morphology were significantly different, and the FeOOH prepared from ferric sulfate had a larger specific surface area, resulting in its better catalytic activity. Finally, the hydroxyl groups and pHzpc of the catalyst surface were measured. It was also found that the FeOOH prepared from ferric sulfate owned more hydroxyl groups and the pHzpc of the surface was closer to the pH of the degradation substrate, which illustrated the reasons for the increased catalytic activity. In addition, the degradation kinetics conformed to the pseudo first-order kinetic model and the hydroxyl radicals played an important role in the reaction process.
Related Concept Videos
Turnover Number and Catalytic Efficiency
Chymotrypsin is a pancreatic enzyme that breaks down proteins during digestion....
Catalytically Perfect Enzymes
Most enzymes...
Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the...
Reduction of Benzene to Cyclohexane: Catalytic Hydrogenation
Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...
Mitochondrial Precursor Proteins
Most of the mitochondrial...

