Surface Chemistry of Oil-Filled Organic Nanoparticle Coated Papers Analyzed Using Micro-Raman Mapping

Raman spectroscopy and micro-Raman mapping have been used to study the distribution of different chemical components at the surface of coated papers. The paper coatings contain organic nanoparticles with a structure of poly(styrene- co-maleimide) and encapsulated vegetable oils. Raman spectroscopy is able to differentiate between various types of oil, i.e., polyunsaturated, monounsaturated, or saturated, and indicates that the degree of imidization and reactivity of the oil (amount of free oil) complement each other. The surface mapping over large areas (5 × 5 mm2) illustrates good homogeneity of the coating layer and even surface coverage. The imide and oil are homogeneously distributed within the coating itself without a tendency for agglomeration. The covered areas of imide and oil mostly overlap for polyunsaturated oils, while larger amounts of oil occur outside the imide zones for monounsaturated and saturated oils. The latter indicates that the oil is partly "free" within the coating and acts as a continuous binder phase. The surface mapping over smaller areas (1 × 1 mm2) shows the coating and cellulose covered areas are complementary. The surface maps confirm that interaction between the coating and paper substrate happens through hydrogen bonding. Heterogeneities in the coating are due to the presence of remaining ammonolyzed maleic anhydride precursors forming amic acid moieties. The organic phase, oil phase, and cellulose substrate can also be differentiated by principal component analysis of the surface maps.