Related Experiment Video
Updated: Feb 5, 2026

Building Double-decker Traps for Early Detection of Emerald Ash Borer
Published on: October 4, 2017
A zero-waste process for the management of MSWI fly ashes: production of ordinary Portland cement
Cécile Diliberto1, Eric Meux2, Sébastien Diliberto2
1Institut Jean Lamour, UMR/CNRS 7198, Université de Lorraine, Equipe 'Matériaux pour le Génie Civil', IUTNB, Villers-lès-Nancy, France.
Abstract:
Municipal solid waste incineration (MSWI) fly ashes are hazardous waste since they contain organic pollutants, heavy metals and an important amount of various soluble salts. However their chemical composition is interesting for their valorization in cement production. The objective of this paper is to assess the possibility of MSWI fly ashes reuse as cement raw meal, after pre-treatment, at a laboratory scale. The environmental impact has also been studied (analyses of the metals, of dioxins and furans and leaching tests on clinker produced). Experimental results show that the replacement of MSWI fly ash could be taken up to 30% in the raw mixes, according to the chemical composition of the MSWI fly ashes. This substitution is also to be refined according to the content of hazardous elements contents. This study also shows that the pre-treatment must be well carried out in order to limit the alkaline contents which may affect the quality of the cementitious phases.
Related Concept Videos
Portland Cement
Hydration of Cement
Soundness of Cement
Fineness of Cement
Direct...
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
Types of Cement I
Type I (Ordinary Portland Cement) is widely used for general construction where special properties are not required. It has moderate sulfate resistance and heat of hydration.
Type II (Modified Cement) offers moderate resistance to sulfate attack and a lower rate of heat development compared to Type I. It is suitable for structures in...

