Using Polyurethane Foam-Based Passive Air Sampling Technique to Monitor Monosaccharides at a Regional Scale

Monosaccharides are important tracers of pollution aerosol from biomass burning. Air sampling of monosaccharides is often conducted using active samplers. However, applicability of sampling monosaccharides using polyurethane foam passive air samplers (PUF-PASs) has not been investigated, since passive air samplers are often applied to monitor semivolatile organic contaminants in large scale and remote area. Our study successfully collected atmospheric monosaccharides using PUF-PASs, providing a valuable tool for monosaccharides sampling. PUF-PAS sampling rates for individual monosaccharides were calibrated using an active sampler for 92 days, and were 1.1, 1.5, and 1.1 m³/d for levoglucosan, mannosan, and galactosan, respectively. Degradation of monosaccharides in PUF-PAS was demonstrated to be negligible by spike test of ¹³C-labeled levoglucosan. Furthermore, passive sampling was carried out at 11 sites in the Pearl River Delta of Southern China from January to April and July to September of 2015. Monosaccharide concentrations derived from PUF-PASs were comparable with the reported data obtained by active sampling, demonstrating that the PUF-PAS approach is valid for monosaccharides monitoring. On the basis of our approach, we found that there is a clear correlation between the monosaccharide concentrations and the MODIS fire activities during January-April.