Vacuum-driven fluid manipulation by a piezoelectric diaphragm micropump for microfluidic droplet generation with a...

Recently, we developed a convenient microfluidic droplet generation device based on vacuum-driven fluid manipulation with a piezoelectric diaphragm micropump. In the present study built on our previous work, we investigate the influence of settings applied to the piezoelectric pump, such as peak-to-peak drive voltage (V_p-p ) and wave frequency, on droplet generation characteristics. Stepwise adjustments to the drive voltage in ±10-V_p-p increments over the range of 200-250 V_p-p during droplet creation revealed that the droplet generation rate could be reproducibly controlled at a specific drive voltage. The droplet generation rate switched within <0.5 s after the input of a new voltage. Although the droplet generation rate depended on the drive voltage, this setting had almost no influence on droplet size. The frequency over the selected range (50-60 Hz) did not markedly influence the droplet generation rate or droplet size. We show that the current fluid manipulation system can be conveniently used for both droplet generation and for rapid droplet reading, which is required in many microfluidic-based applications.