Ag nanoparticles coated cellulose membrane with high infrared reflection, breathability and antibacterial property

Xuejie Yue1, Tao Zhang1, Dongya Yang1

  • 1School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, Jiangsu Province, China.

Related Concept Videos

Thermal Insulation in Masonry Walls01:22

Thermal Insulation in Masonry Walls

In hot, dry climates, the thermal mass of masonry walls can be beneficial, absorbing heat during the day and releasing it at night, thereby stabilizing indoor temperatures. However, in most other climates, additional insulation is necessary to enhance thermal resistance.
External insulation can be applied using an Exterior Insulation and Finish System (EIFS), which involves affixing panels of plastic foam to the wall and covering them with a polymeric stucco reinforced with glass fiber mesh....
548
Reflective Property of Parabolas01:26

Reflective Property of Parabolas

A parabola is a basic type of conic section that results from the intersection of a plane with a double-napped cone in a direction parallel to one of the cone's sides. This U-shaped curve has a distinctive reflective property: all incoming rays parallel to its axis of symmetry are directed toward a single point, known as the focus. This property is widely utilized in optical and communication technologies that require precise signal concentration.In analytic geometry, a parabola is defined as...
269
Attenuated Total Reflectance (ATR) Infrared Spectroscopy: Overview01:13

Attenuated Total Reflectance (ATR) Infrared Spectroscopy: Overview

Attenuated total reflectance (ATR) infrared spectroscopy is a powerful analytical technique used to study the composition of materials. It is widely employed in chemistry, materials science, forensic science, and other fields where sample characterization is required. ATR has several advantages over traditional transmission IR spectroscopy, including the requirement of little to no sample preparation and the ability to analyze a wide range of samples.
The ATR process begins by directing a beam...
1.3K
Conductors and Insulators01:19

Conductors and Insulators

Some materials may easily let electrical charges pass through them, while others obstruct their flow. The former are called conductors and the latter insulators. The atomic structures of materials determine whether they are conductors or insulators of electricity.
Most metals are conductors. Their atomic configuration is such that one or more electron(s) are loosely bound to the nucleus in each atom. Thus, a sea of mobile electrons are available in them, known as free electrons. Their easy...
10.8K
Insulation Coordination01:23

Insulation Coordination

Insulation coordination is the process of matching electric equipment's insulation strength with protective device characteristics to protect the equipment against expected overvoltages. This selection is based on engineering judgment and cost. Equipment can generally withstand short-duration high transient overvoltages, but repeated tests with identical waveforms can yield inconsistent results. As a result, standard impulse voltage waveforms are used for testing, defined by specific times...
571
Cellulose and Pectic Polysaccharides01:15

Cellulose and Pectic Polysaccharides

 Every plant cell has a cell wall that protects the cell, provides structural support, and gives the cell shape. Cellulose, the main structural component of the plant cell wall, makes up over 30% of plant matter. It is the most abundant organic compound on earth.  Cellulose is an unbranched polysaccharide composed of linear chains of glucose molecules linked by β (1→4) glycosidic bonds.
As a cell matures, its cell wall specializes according to its type. For example, the...
4.9K