Anatomical considerations for minimally invasive osteotomy of the fifth metatarsal for bunionette correction - A

Francesc Malagelada1, Miki Dalmau-Pastor2, Cyrus Sahirad3

  • 1Foot and Ankle Unit, Orthopaedic and Trauma Surgery, Royal London Hospital, Barts Health NHS Trust, London, UK; Laboratory of Arthroscopic and Surgical Anatomy, Department of Pathology and Experimental Therapeutics (Human Anatomy and Embryology Unit), University of Barcelona, Barcelona, Spain.

Abstract

Related Concept Videos

Pilot and Numeric Relaying01:21

Pilot and Numeric Relaying

Pilot relaying is a type of differential protection used in power systems. It compares electrical quantities at the terminals of equipment via a communication channel instead of direct relay interconnection. This method is essential for transmission lines where the terminals are far apart, typically up to 80 km for lines with 69 to 115 kV ratings. Four types of communication channels are used for pilot relaying:
492
Distance Corrections01:15

Distance Corrections

To achieve precise distance measurements, especially in surveying and construction, certain corrections must be applied to account for potential sources of error like the standardization errors, temperature variations, and slope adjustments.Standardization error emerges when measurement equipment undergoes changes, such as wear, repairs, or weather impacts. To address this, surveyors compare the equipment’s readings to a standard. This process identifies any deviation that might lead to...
290
Power Factor Correction01:20

Power Factor Correction

The power transmission to a factory involves the transfer of apparent power, a combination of active and reactive power. The power factor measures how effectively electrical power is converted into useful work output. The ratio of the real power (KW) that does the work to the apparent power (KVA) supplied to the circuit.
539
Design Consideration01:22

Design Consideration

Designing a structure involves a series of considerations, primarily the material's ultimate strength, calculated through tests that measure changes under increased force until the material reaches its breaking point or limit. The ultimate load, where the material breaks, is divided by its original cross-sectional area, resulting in the ultimate normal stress or strength. The ultimate shearing stress is another significant factor taken into account.
The factor of safety is another key...
576
Anatomical Positions01:11

Anatomical Positions

In anatomy, several standard anatomical positions are used as references for describing the position and orientation of different body parts. These positions help provide a common frame of reference when discussing anatomical structures. The anatomical position is the standard reference point for describing the body's position and orientation. In this position:
The body is upright, facing forward, and standing erect.
The feet are parallel and flat on the floor.
The arms are hanging by the...
19.9K
Anatomical Terminology01:20

Anatomical Terminology

Knowledge of anatomy is essential to understand human biology and medicine. Anatomists and health care professionals use standard terminology to describe the human body with more precision and no ambiguity. Anatomical terms have mostly Greek and Latin-derived roots. Because these languages are rarely used in conversation, the meaning of words remains the same. Each term is made up of a root in between the prefixes and suffixes. The root of a term often refers to an organ, tissue, or condition,...
27.1K