Related Experiment Video
Updated: Feb 3, 2026

Synthesis and Testing of Supported Pt-Cu Solid Solution Nanoparticle Catalysts for Propane Dehydrogenation
Published on: July 18, 2017
Selective and Stable Non-Noble-Metal Intermetallic Compound Catalyst for the Direct Dehydrogenation of Propane to
Yang He1, Yuanjun Song1, David A Cullen2
1Department of Chemical and Biomolecular Engineering , University of Tennessee , Knoxville , Tennessee 37996 , United States.
Abstract:
A non-noble intermetallic compound catalyst consisting of Ni3Ga nanoparticles supported on Al2O3 that exhibits high selectivity (∼94%), comparable activity (TOF = 4.7 × 10-2 s-1), good stability (∼94% to 81% over the 82 h test), and regenerability in the direct dehydrogenation of propane to propylene at 600 °C has been developed. Through synthesis techniques that stabilize the Ni3Ga phase, the surface composition of the catalytic nanoparticles could be tuned by Ni and Ga loading such that improved selectivity toward propylene may be achieved. Comparisons with well-defined silica-supported Ni3Ga and NiGa catalysts and Ni3Ga/Al2O3 with a range of Ni:Ga loading suggested that a specific surface composition range was most promising for propylene production. The presence of Ni at the active particle surface was also found to be critical to drive dehydrogenation and enhance conversion, whereas the presence of Ga was necessary to attenuate the reactivity of the surface to improve selectivity and catalyst stability.
More Related Videos
Related Concept Videos
Noble Gases
The elements in group 18 are noble gases (helium, neon, argon, krypton, xenon, and radon). They earned the name “noble” because they were assumed to be nonreactive since they have filled valence shells. In 1962, Dr. Neil Bartlett at the University of British Columbia proved this assumption to be false.
Alkali Metals
Table 1: Properties of the alkali metals
Organic Compounds
Molecules and Compounds
Conformations of Ethane and Propane
Staggered conformation is a low energy and more stable conformation with the C-H bonds on the front carbon placed at 60°dihedral angles relative to the C-H bonds on the back carbon, leading to a reduced torsional strain. In staggered...
Classification of Elements and Compounds
Compounds are pure substances composed of two or more elements in fixed, definite proportions. Compounds are classified as ionic or molecular (covalent) based on the bonds...

