Improvement of in vitro behavior of an Mg alloy using a nanostructured composite bioceramic coating

Magnesium (Mg) alloys as a new group of biodegradable metal implants are being extensively investigated as a promising selection for biomaterials applications due to their apt mechanical and biological performance. However, as a foremost drawback of Mg alloys, the high degradation in body fluid prevents its clinical applications. In this work, a bioceramic composite coating is developed composed of diopside, bredigite, and fluoridated hydroxyapatite on the AZ91 Mg alloy in order to moderate the degradation rate, while improving its bioactivity, cell compatibility, and mechanical integrity. Microstructural studies were performed using a transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray diffraction (XRD) analysis, and energy dispersive spectroscopy (EDS). The degradation properties of samples were carried out under two steps, including electrochemical corrosion test and immersion test in simulated body fluid (SBF). Additionally, compression test was performed to evaluate the mechanical integrity of the specimens. L-929 fibroblast cells were cultured on the samples to determine the cell compatibility of the samples, including the cell viability and attachment. The degradation results suggest that the composite coating decreases the degradation and improves the bioactivity of AZ91 Mg alloy substrate. No considerable deterioration in the compression strength was observed for the coated samples compared to the uncoated sample after 4 weeks immersion. Cytotoxicity test indicated that the coatings improve the cell compatibility of AZ91 alloy for L-929 cells.