Mercury adsorption and re-emission inhibition from actual WFGD wastewater using sulfur-containing activated carbon

A series of batch experiments were conducted to obtain the optimal adsorption condition for removing aqueous Hg from actual lime-based wet flue gas desulfurization (WFGD) wastewater with sulfur-containing activated carbon (SAC). The experimental results showed that SAC1 had an average 0.32 μg mg^-1 larger aqueous Hg adsorption capacity and 21% larger Hg removal than the CS₂-treated SAC1 (i.e., SAC2) in all tested pH values, confirming that greater sulfur content associated with effective sulfur functional group (i.e., elemental S) caused the larger Hg adsorption capacity. Furthermore, as increasing pH from 4 to 7, the Hg adsorption capacity of SAC1 decreased by 22% (i.e., 0.27 μg mg^-1). The equilibrium Hg adsorption capacity was well fitted with linear and Freundlich adsorption isotherms. Kinetic simulations showed that both pseudo-second order and Elovich equations could well describe the chemisorption behavior of Hg to SAC1. Thermodynamic parameter calculation confirmed that Hg adsorption by SAC1 was thermodynamically spontaneous and exothermic. Re-emission of gaseous Hg markedly decreased by 88% as SO₃^2- addition increased from 0 to 0.01 mM. Notably, by the addition of SAC1, zero re-emission of gaseous Hg was achieved. These experimental results confirm that the capture of aqueous Hg²⁺ and the inhibition of gaseous Hg⁰ re-emission can be successfully and simultaneously achieved in actual WFGD wastewater via the addition of SAC.