Related Experiment Video
Updated: Feb 3, 2026

Author Spotlight: Optimized Transformation Protocol for Chlorella vulgaris Using Agrobacterium tumefaciens
Published on: October 27, 2023
Microwave-assisted co-pyrolysis of Chlorella vulgaris and wood sawdust using different additives
Lin Chen1, Zhaosheng Yu1, Hao Xu1
1School of Electric Power, South China University of Technology, 510640 Guangzhou, China; Guangdong Province Key Laboratory of Efficient and Clean Energy Utilization, 510640 Guangzhou, China.
Abstract:
The microwave-assisted co-pyrolysis of Chlorella vulgaris (CV), wood sawdust (WS) and their blends with additives were investigated. There was a higher liquid and solid yield with silicon carbide (SiC) than activated carbon (AC) in most of samples. Microwave-assisted pyrolysis with additives behaved a positive effect on deoxygenation and aromatization, but not apparent denitrification. With the increase of CV proportion, aromatic hydrocarbons decreased, but aliphatic hydrocarbons increased using AC. High selectivity of phenols was reached at the sample of WS (relative content as 43.6%) using SiC; High selectivity of alkenes was reached at the sample of CV (relative content as 31.2%) and alkanes at the blend sample of 70% CV and 30% WS (relative content as 9.45%). Bio-oil and biochar from microwave-assisted pyrolysis of WS had higher calorific value than that of CV both with AC and SiC. Calorific value of bio-oil decreased by 33.3% after mixing CV with WS.
More Related Videos
09:46Reducing Willow Wood Fuel Emission by Low Temperature Microwave Assisted Hydrothermal Carbonization
Published on: May 19, 2019
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for CuII Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Related Concept Videos
Wood Surfacing
The equipment used in the surfacing process is a plane equipped with rotating blades. This tool efficiently smoothens the wood surface and can...
Wood Fasteners
Nails are the most common fasteners, consisting of sharp-pointed metal pins that are driven into wood using a hammer or a mechanical nail gun. They come in a variety of diameters, heads, and lengths. Nailing techniques include...
Conjugate Addition (1,4-Addition) vs Direct Addition (1,2-Addition)
Conjugate addition results in a thermodynamically stable product. The reaction retains the stronger C=O bond at the expense of the weaker C=C π bond. The process is slow as the β carbon is less electrophilic than the carbonyl carbon.
Direct addition products are...
Introduction to Wood
The structural integrity of the...
Seasoning of Wood
Achieving equilibrium moisture content is the goal of seasoning; this is the point where the wood's moisture content stabilizes to align with the moisture levels of the surrounding environment. Proper...
Wood Products
Glue-laminated wood, often referred to as glulam, combines multiple smaller pieces of dimensional lumber using adhesives to form a single, larger piece. Cross-laminated timber consists...