Characterization and Analysis of Strain Heterogeneity at Grain-Scale of Titanium Alloy with Tri-Modal Microstructure...

Grain-scale strain heterogeneity characteristics play a critical role in the ductile damage behavior and mechanical properties of two-phase titanium alloys. In this work, the grain-scale strain distribution, strain heterogeneity, and strain localization of titanium alloy with tri-modal microstructure (consisting of equiaxed α (α_p), lamellar α (α_l), and β transformed matrix (β_t)) during tensile deformation were experimentally investigated. The results show that the strain probability distribution of the whole microstructure obeys normal distribution during deformation. Significant strain heterogeneities exist in each constituent (α_p, α_l, and β_t) and the whole microstructure. At lower macro-strain, α_p and α_l exhibit higher average strain than those of β_t and the whole of the microstructure. Meanwhile, strain heterogeneity of each constituent is small and has a negligible change. The strain heterogeneity of the whole microstructure is mainly determined by α_p. At larger macro-strain, some highly deformed regions produce and their positions do not change during further deformation. As a result, the strain heterogeneity of each constituent increases fast, and the strain heterogeneity of whole microstructure is mainly related to α_l in this deformation stage. On the other hand, two types of strain localization may be generated within α_p and α_l and at the α_p/β_t and α_l/β_t boundaries, respectively. The former type is caused by transgranular intense slip deformation and presents crystal orientation dependence. The latter type is related to the boundary sliding and presents spatial distribution dependence for α_l. These strain localizations greatly determine the micro-damages, thus forming the corresponding micro-voids within α_p and α_l and the micro-cracks at α_p/β_t and α_l/β_t boundaries in tri-modal microstructure at larger deformation.